导语

  

内容提要

  

    张小萍、丛后罗主编的《橡胶工艺技术概论(英汉双语高职高专十三五规划教材)》为英汉双语教材，以橡胶加工工艺基本知识为内容主体，节选相关英文原版经典课文，语言标准、专业性强。全书以英文为主，对课文中的专业词汇、短语及重难点句子进行了中文注释翻译，方便学习者对专业知识内容的学习理解。全书分为6个部分，包括橡胶发展简史（Introduction）、生胶原材料（Introduction to Raw Rubber）、橡胶配合（Introduction to Rubber Compounding）、橡胶加工工艺（Processing Methods in the Rubber Industry）、橡胶硫化（Vulcanization of Rubber）和胶料物理机械性能测试（Property Tests of Uncured and Cured Rubber）。
    本书可作为高等职业院校具有橡胶工程特色的相关专业的双语教学教材，也可作为从事橡胶行业的工程技术人员的学习参考书。

PART 1  Introduction
  Lesson 1  History of Natural Rubber
  Lesson 2  History of Synthetic Rubber
PART 2  Introduction to Raw Rubber
  Lesson 3  Natural Rubber (NR)
  Lesson 4  Polyisoprene Rubber (IR)
  Lesson 5  Styrene Butadiene Rubber (SBR)
  Lesson 6  Polybutadiene Rubber (BR)
  Lesson 7  Isobutylene-Based Elastomer (IIR)
  Lesson 8  Ethylene Propylene Rubber (EPR)
  Lesson 9  Nitrile Rubber (NBR)
  Lesson 10  Neoprene (CR)
  Lesson 11  Chlorinated and Chlorosulfonated Polyethylene (CM, CSM)
  Lesson 12  Silicone Rubber (MQ,MVQ,MPVQ)
  Lesson 13  Fluorocarbon Rubber (FKM)
  Lesson 14  Thermoplastic Elastomers (TPE)
PART 3  Introduction to Rubber Compounding
  Lesson 15  Introduction to Rubber Compounding
  Lesson 16  Compound Formulation
  Lesson 17  Raw gum elastomer
  Lesson 18  Vulcanizing system
  Lesson 19  Fillers
  Lesson 20  Plasticizers
  Lesson 21  Antidegradants
PART 4  Processing Methods in the Rubber Industry
  Lesson 22  Introduction of Rubber Processing
  Lesson 23  Rubber Mixing
  Lesson 24  Rubber Extrusion
  Lesson 25  Calendering of Rubber
  Lesson 26  Compression Molding
  Lesson 27  Injection Molding of Rubber
PART 5  Vulcanization of Rubber
  Lesson 28  Definition
  Lesson 29  Measurement of Vulcanization
  Lesson 30  Effects of Vulcanization on Rubber Properties
  Lesson 31  Vulcanization with Sulfur
  Lesson 32  Non-Sulfur Vulcanization
  Lesson 33  Dynamic Vulcanization
PART 6  Property Tests of Uncured and Cured Rubber
  Lesson 34  Introduction of the Basic Concepts of Testing
  Lesson 35  Selected Compound Properties and Test
  Lesson 36  Viscosity Tests
  Lesson 37  Vulcanization Testing
  Lesson 38  Tensile Test
  Lesson 39  Durometer Hardness
  Lesson 40  Compression Set
  Lesson 41  Abrasion Resistance
  Lesson 42  Fluid Resistance
  Lesson 43  Heat Resistance
  Lesson 44  Ozone Resistance
References